Leonard LAI6000F Manuel d'utilisateur télécharger pdf (Page 25)

Problem Possible cause Remedy

The sensor fields become hot. The cookware is too large or

you put it too near to the con-

trols.

Put large cookware on the rear

cooking zones if necessary.

comes on.

The Automatic Switch Off op-

erates.

Deactivate the appliance and

activate it again.

comes on.

The Child Safety Device or the

Lock function operates.

Refer to the chapter “Daily Use”.

comes on.

No cookware is on the cook-

ing zone.

Put cookware on the cooking

zone.

The cookware is incorrect. Use the correct cookware.

The diameter of the bottom of

the cookware is too small for

the cooking zone.

Move cookware to a smaller

cooking zone.

and a number come on.

There is an error in the appli-

ance.

Disconnect the appliance from

the electrical supply for some

time. Disconnect the fuse from

the electrical system of the

house. Connect it again. If

comes on again, speak to the

service centre.

comes on.

There is an error in the appli-

ance because a cookware

boils dry. The overheating pro-

tection for the cooking zones

and the Automatic Switch Off

operate.

Deactivate the appliance. Re-

move the hot cookware. After,

approximately 30 seconds, acti-

vate the cooking zone again. If

the cookware was the problem,

the error message goes out of

the display, but the residual

heat indicator can stay. Let the

cookware become sufficiently

cool and refer to “Cookware for

the induction cooking zone” to

see if your cookware is compat-

ible with the appliance.

If you tried the above solutions and cannot

repair the problem, speak to your dealer or

the customer service. Give the data from

the rating plate, three digit letter code for

the glass ceramic (it is in the corner of the

glass surface) and an error message that

comes on.

Make sure, you operated the appliance cor-

rectly. If not the servicing by a customer

service technician or dealer will not be free

of charge, also during the warranty period.

The instructions about the customer service

and conditions of guarantee are in the guar-

antee booklet.

INSTALLATION INSTRUCTIONS

Warning! Refer to "Safety information"

chapter.

Before the installation

Before the installation of the appliance, re-

cord the information below from the rating

plate. The rating plate is on the bottom of

the appliance casing.

• Model ...........................

• PNC .............................

• Serial number ....................

Built-in appliances

• Only use the built-in appliances after you

assemble the appliance into correct built-

in units and work surfaces that align to

the standards.

leonard 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Commentaires sur ces manuels

Pas de commentaire